Digital amplifier Nexo NXAMP4x1 MKII Second Hand with 4 channels. The 4 channels can be configured to work together, for crossover applications or completely separate. It comes equipped with high-quality balanced analog XLR inputs, using "cascade" digital-to-analog converters to provide excellent dynamic range and 32-bit / 96 KHz resolution. If required, AES/EBU, Ethersound, Dante or AES67 option cards can be installed to allow digital input.
The amplifier also includes a multicore ARM processor and 3 x multicore DSPs for more processing power for future upgrades. Unlike the previous model, the new model also offers 2 RJ45 data ports, for easier remote control, firmware upgrade and daisy-chaining of NXAMP MKII devices
Note:
- The product is used
- Excellent working and aesthetic condition
- Warranty 12 months
- The images are for information purposes only, there may be slight differences between the image shown online and the actual product
Digital amplifier Nexo NXAMP4x1 MKII Second Hand
- Digital amplifier with 4 channels
- 4 x amplifier channels, 2 by 2 bridgeable
- Maximum output voltage (no load) 4x 105 Volts
- Maximum output power (4-channel mode / 8 Ohm load per channel) 4x 600 Watts
- Maximum output power (mode 4 channels / 4 Ohms) load per channel) 4x 900 watts
- Maximum output power (4 channel mode / 2 ohm load per channel) 4x 1300 watts
- Maximum output power (2 channel mode / 8 ohm load per channel) 2x 1800 watts
- Maximum output power (2 channel mode / 4 Ohm load per channel) 2x 2600 watts
- Power consumption (standby): 10 W
- Power consumption (idle) 200 W
- Frequency response: ±1dB from 10Hz to 20KHz
- Input Impedance / Input Sensitivity: 20 K Ohms / 13 dBu
- Audio AD and DA converters: 24-bit at 96 KHz
- 3x 64-bit multicore processing DSPs
- The rear panel has:
- 4x balanced analog inputs on XLR3
- 4x Neutrik Speakon NL-4 outputs
- RS232: 1x dedicated DB-9 connector for DPU connection
- GPIO port: 1x DB-25 connector with 5x inputs and 8x outputs for DMU connection
- Expansion slot: For network and digital audio cards, 4x digital audio inputs and remote control
- Power supply: 1x Neutrik Powercon NAC3 (1x 20 A)
- The front panel has:
- Rotary encoder with push and backlight, touch screen
- Color screen with a diagonal of 4.3", WQVGA, 480 x 272
- Universal power supply with active PFC 100-240 V (50/60 Hz)
- Power consumption 1/4 max 2 ohms: 1900 W
- Rackmountable: 2U 19" rack, 502 mm / 20" depth
- Weight: 15.7kg / 33.1lbs
Note:
- The product is used
- Excellent working and aesthetic condition
- Warranty 12 months
- The images are for information purposes only, there may be slight differences between the image shown online and the actual product