Se Audiotechnik - 2xCV212 - 2xB18 Bundle
2x Se-Audiotechnik CV 212 passive speakers
- 2-way passive speaker
- Speaker configuration:
- LF: 2x 12″ driver (3″ voice coil)
- HF: 1x 1.4″ compression driver (3″ coil)
- Materials: 15mm ventilated plywood cabinet with powder coated perforated steel grille
- It has two side handles and non-slip rubber feet
- Frequency range (-3 dB): 100 Hz – 15 kHz
- Frequency range (-10 dB): 50 Hz – 16 kHz
- Dispersion angles (-6dB) [H x V]: 90° x 60°
- Nominal impedance: 4 Ω
- Sensitivity: 100 dB
- Peak power: 3200 W
- Continuous power: 800 W
- Max SPL: 140dB
- Crossover frequency: 1.15 kHz
- Connectors:
- Input: Neutrik speakON ® NL4
- Output: Neutrik speakON ® NL4
- Fastening system: 14 points x M10
- Dimensions: 1017 x 380 x 388 mm
- Net weight: 35 kg
2x passive subwoofer Se Audiotechnik B-Line 18″
- Passive subwoofer
- System type: one-way passive system
- Speaker configuration: 1x 18″ driver
- Ventilated cabinet
- Frequency range (-3dB): 37 Hz – 130 Hz
- Frequency range (-6dB): 29 Hz – 160 Hz
- Dispersion angle (-6dB): Omnidirectional
- Nominal impedance: 8 Ω
- Sensitivity: 98 dB
- Peak power: 2400 W
- Continuous power: 600 W
- Max SPL: 138dB
- Connectors:
- Input: 4x Neutrik speakon NL4
- Output: 1x Neutrik speakon NL4
- Dimensions: 572 x 542 x 797 mm
- Net weight: 41 kg
1x Dynacord PowerMate 1000-3 amplified mixer
- Amplified mixer
- Equipped with high quality microphone preamps
- Specially developed dust-resistant Powermate series faders
- Class D digital amplifier
- Feedback filters
- Stereo effects processors
- Lexicon voice processor
- USB interface for connecting to PC
- 10 channels: 6 mono + 4 stereo
- Auxiliaries (MON, FX, AUX): 2 Pre, 2 Post, 2 Pre/Post switchable
- Crosstalk at 1kHz between fader and aux-send: >85dB
- Crosstalk between channels: < -80dB
- Maximum power at medium frequencies 1 kHz, THD=1%: 2 x 1350W @2.66ohm; 2 x 1000W @ 4ohms; 2 x 600W @ 8ohms
- RMS power, THD=0.1%: 2 x 900W @ 4ohms; 2 x 450W @ 8ohms
- Amplifier signal/noise ratio at 4 ohms: 105 dB
- EQ:
- LO Shelving: +/- 15 dB / 60 Hz
- MID Peaking, mono inputs: +/- 15 dB / 100 Hz - 8 kHz
- MID Peaking, stereo inputs: +/- 12 dB / 2.4 kHz
- HI Shelving: +/- 15 dB / 12 kHz
- Master EQ, 11-band (63, 125, 250, 400, 1k, 1.6k, 2.5k, 4k, 6.3k, 12k Hz)
- Filters:
- Low-cut on mono inputs: 80Hz, 18 dB/oct
- Voice filter on mono inputs
- Feedback Filter, Monitors 1/2: 70 Hz - 7 kHz, Notch, -9 dB
- Switchable LPN (low-pass notch) filter
- Display: OLED screen with high contrast
- Effects:
- Dual 24/48-bit multi-effects processor
- Presets: 100 factory + 20 user
- Remote control: footswitch, MIDI 1 in/1 out
- Digital audio interface:
- Channels: 4 inputs / 4 outputs
- AD/DA conversion: 24 bits
- Sampling rate (sampling): 44.1 / 48 / 88.2 /96 kHz
- PC interface: USB 2.0
- Integrated protections:
- Mixer outputs supervised by relays: MON1, MON2, MASTER A
- Amplifier Protections: Audio Limiters, High Temperature, DC, High HF Frequencies, Short Circuit, Peak Current Limiters, Start Delay
- Cooling: fans with controlled rotation
- Phantom power: 48V, switchable by groups
- Dimensions: 483 x 135 x 443.7 mm
- Weight: 12.5 kg
1x Dynacord L3600FD DSP power amplifier
- DSP power amplifier: 2 x 1800 W
- It features True channel grouping control with extra DSP capabilities such as: PEQ, GEQ and Delay for each group
- Benefit from FIR-Drive, a premium feature that optimizes factory settings for audio performance previously unavailable in this range, providing constant stability at 2 Ohm impedance
- Protection circuits for the amplifier as well as connected speakers, intuitive system control software making it easy to set up and control
- power max. in Bridged mode: 4Ω=6000W; 8Ω=3400W
- power max. in Dual Channel mode: 2Ω=3000W; 2.6Ω=2500W; 4Ω=1700W; 8Ω=900W
- Power Max. in Single Channel mode: 2Ω=3200W; 2.6Ω= 2700W; 4Ω=1800W; 8Ω=950W
- Frequency response: 10 Hz - 21 kHz (± 1dB)
- Input impedance: 20 kΩ
- max level input: +21 dBu
- Signal processing: FIR filters, audio limiters, output delay per channel, 31-band GEQ per channel, PEQ per channel
- Signal-to-Noise Ratio (A-weighted): > 109 dB
- Total harmonic distortion: <% 0.05%
- Power consumption: 850W
- Ambient temperature: +5°C to +40°C
- Net weight: 18.2 kg
- Dimensions: 462.4 x 88 x 483 mm
- Accessories included: power supply and USB cable
Read moreShow less