Sound system Se-Audiotechnik CV-212 / 118B / LA 10.4D system
Professional sound system
2x SE Audiotehnik CV212 long range tops - passive speakers
- 2-way system
- Frequency response (-3 db): 100 - 15 000 Hz
- Frequency response (-10 dB): 50 Hz – 16,000 Hz
- Horizontal x vertical coverage: 90° x 60°
- Nominal impedance: 4 Ω
- Sensitivity: 100 dB
- Peak power: 3200 W
- Continuous power: 800 W
- Maximum SPL: 140 dB
- Crossover frequency: 1.15 kHz
- Connectors:
- Input: Neutrik speakON® NL4
- Output: Neutrik speakON® NL4
- Clamping system with 14 x M10
- Cabinet material: 15 mm plywood
- Dimensions: 1017 x 380 x 388 mm
- Weight: 35 kg
4x Se-Audiotechnik CV-118B subwoofers
- Passive subwoofer
- Speaker configuration: 1 x 18" (4" coil)
- Case type: bandpass cabinet
- Materials: 18mm plywood cabinet with powder coated perforated steel grid
- Features two ergonomically placed handles on the side, non-slip feet and M20 stand mounting flange
- Frequency range (±3 dB): 40 Hz – 130 Hz
- Frequency range (-10 dB): 31 Hz – 140 Hz
- Dispersion angle (-6 dB) [H x V]: omnidirectional
- Nominal impedance: 8 Ω
- Sensitivity: 101 dB
- Peak power: 3400 W
- Continuous power: 850 W
- Max SPL: 142 dB
- Connectors:
- Input: Neutrik speakON® NL4
- Output: Neutrik speakON® NL4
- Dimensions: 558 x 762 x 682 mm
- Weight: 62 kg
1x SE Audiotehnik LA 10.4D system amplifier
- DSP network amplifier
- Amplification class: D
- Number of channels: 4
- Power output:
- 4 x 1200 W at 8 Ω, 1 kHz, 1%THD
- 4 x 1400 W at 8 Ω, 1 kHz, 2%THD
- 4 x 1700 W at 4 Ω, 1 kHz, 1%THD
- 4 x 2500 W at 4 Ω, 1 kHz, 2%THD
- 4 x 1400 W at 8 Ω, 50 Hz, 4%THD
- 4 x 1500 W at 4 Ω, 50 Hz, 4%THD
- Minimum load impedance: 4 Ω (with current limiting)
- Frequency response (Line In) (4 Ω): 20 Hz - 20 kHz: -1 dB
- Damping factor:
- 8 Ω: > 500 @ 1 kHz
- 4 Ω: > 250 @ 1 kHz
- Input impedance: > 20 kΩ balanced
- Maximum input level: +22 dBu
- SNR Line In to Sk out: 110.7 dB, 113.5 dB(A) (@1500 W/8 Ω, +42 dBu)
- Noise level: -68.7 dBu (280 uV), -71.5 dBu(A) (200 uV(A))
- Channel crosstalk: -97.8 dB
- THD+N:
- < 0.0087% at 175 W into 4 Ω (1/8 of rated power)
- < 0.0095% at 350 W into 4 Ω (1/4 of rated power)
- DSP 48 kHz, 32-bit SHARC DSP with floating point processing
- System Latency: 1ms to 10ms (depending on preset)
- Protection: short circuit, overheat, overcurrent
- Cooling:
- Two fans with temperature dependent speed and tacho feedback
- Front to back airflow
- Energy efficiency: > 70 %
- Power consumption (both PowerCON® combined):
- Off: 3W
- Idle/ready to play: 70W
- At 1/8 of rated power: 1000 W
- At 1/4 of rated power: 2000 W
- At 1/3 of rated power: 2666 W
- Peak power: 8000 W
- Starting current (on PowerCON®):
- 40 A (<1 ms) when connected to the mains
- 9 A (<250 ms) at start-up
- Nominal current (PowerCON®): 9 A (230 VAC); 18 A (115 VAC) at 1/4 rated power
- Operating voltage range: 90 – 265 VAC 50/60 Hz
- Indicators:
- 4x Led input signal level: -30dB, -12dB, -6dB, Clip
- 4x LEDs for channels: Mute, Active, -30dB, -12dB, -6dB, Limit, Protect
- 6x status LEDs: Dante, AES1+2, AES3+4, LAN, Stand-by, Error
- Screen: 3.5" TFT color screen with touch panel and RGB resolution of 320 x 240
- Input connectors:
- 4x male XLR-3 line level inputs and buffered link outputs
- 2x XLR-3 male AES/EBU inputs and buffered link outputs
- 1x Dante® via separate etherCON® terminal (optional)
- 1x Network control via separate etherCON® terminal
- 1x front USB
- User commands:
- Push-button control encoder
- Touch screen
- 4x MUTE outputs
- Power On
- Output connectors: 4x Neutrik SpeakON® NL4 outputs
- Power connector: 1x Neutrik PowerCON® 32A
- DSP features: Levels, Parametric EQ, Delay, Phase, RMS limiter, Peak limiter, IIR/FIR filtering
- Remote control via network:
- Control of individual amplifiers or groups of parameters in distributed amplifiers via desktop software
- Configure any number of amplifiers with specified parameters
- Ingress protection: IP20
- Dimensions: 89 x 483 x 480 mm
- Weight: 14.5 kg
Note: The stands in the picture are not included in the delivery
Read moreShow less