Se-Audiotechnik Sistem CV - Nunti Extins

Se-Audiotechnik CV System - Extended Weddings

Professional wedding audio system consisting of:

• 4 x Se Audiotechnik CV 212
• 2 x Se-Audiotechnik CV-15i
• 6 x Se-Audiotechnik Subwoofer CV-118B
• 2 x Se-Audiotechnik LA 10.4D

2x Amplifier SE Audiotechnik LA 10.4D

• Network DSP amplifier with 4x BTL Class D and channel switch mode power supply
• Channels: 4
• Power output:
  • 4 x 1200 W @ 8 Ω, 1 kHz, 1%THD
  • 4 x 1400 W @ 8 Ω, 1 kHz, 2%THD
  • 4 x 1700 W @ 4 Ω, 1 kHz, 1%THD
  • 4 x 2500 W @ 4 Ω, 1 kHz, 2%THD
  • 4 x 1400 W @ 8 Ω, 50 Hz, 4%THD
  • 4 x 1500 W @ 4 Ω, 50 Hz, 4%THD
• Minimum load impedance: 4 Ω (with current limiting)
• Frequency Response (Line In) (4 Ω): 20 Hz to 20 kHz: -1 dB
• Damping factor:
  • 8 Ω: > 500 @ 1 kHz
  • 4 Ω: > 250 @ 1 kHz
• Input impedance: > 20 kΩ balanced
• Maximum input level: +22 dBu
• SNR Line In to Sk out: 110.7 dB, 113.5 dB(A) (@1500 W/8 Ω, +42 dBu)
• Noise level: -68.7 dBu (280 uV), -71.5 dBu(A) (200 uV(A))
• Channel crosstalk: -97.8 dB
• THD+N:
  • < 0.0087% at 175 W into 4 Ω (1/8 of rated power)
  • < 0.0095% at 350 W into 4 Ω (1/4 of rated power)
• DSP 48 kHz, 32-bit SHARC DSP with floating point processing
• System Latency: 1ms to 10ms (depending on preset)
• Protection: short circuit, overheat, overcurrent
• Cooling:
  • Two fans with temperature dependent speed and tacho feedback
  • Front to back airflow
• Energy efficiency: > 70 %
• Power consumption (both PowerCON® combined):
• Off: 3W
• Idle/ready to play: 70W
  • At 1/8 of rated power: 1000 W
  • At 1/4 of rated power: 2000 W
  • At 1/3 of rated power: 2666 W
• Peak power: 8000 W
• Starting current (on PowerCON®):
  • 40 A
  • 9 A
• Nominal current (PowerCON®): 9 A (230 VAC); 18 A (115 VAC) at 1/4 rated power
• Operating voltage range 90 – 265 VAC 50/60 Hz
• Indicators:
  • 4x Led input signal level: -30dB, -12dB, -6dB, Clip
  • 4x LEDs for channels: Mute, Active, -30dB, -12dB, -6dB, Limit, Protect
  • 6x status LEDs: Dante, AES1+2, AES3+4, LAN, Stand-by, Faul
• Input connectors:
  • 4x male XLR-3 line level inputs and buffered link outputs
  • 2x XLR-3 male AES/EBU inputs and buffered link outputs
  • 1x Dante® via separate etherCON® terminal (optional)
  • 1x Network control via separate etherCON® terminal
  • 1x front USB
• User commands:
  • Push-button control encoder
  • Touch screen
  • 4x MUTE output
  • Power On
• Output connectors: 4 Neutrik SpeakON® NL4 outputs
• Power connector: 1x Neutrik PowerCON® 32A
• DSP features: Levels, Parametric EQ, Delay, Phase, RMS limiter, Peak limiter, IIR/FIR filtering
• Configuration Management:
  • Loading factory presets provided by SE Audiotechnik®
  • Storing and recalling user presets
• Remote control via network:
  • Control of individual amplifiers or groups of parameters in distributed amplifiers via desktop software
  • Configure any number of amplifiers with specified parameters
• Monitoring:
  • temperature
  • Fan speeds
  • TENSIONS
  • Connection states
  • Error states
  • System events
  • Running time
• Product dimensions: 89 x 483 x 480 mm / 2 RU
• Net weight: 14.5 kg
• Package dimensions: 183 x 650 x 565 mm
• Total weight: 16.5 kg
• Cabinet: Aluminum front panel, steel housing
• Rack mount: Four front 6mm holes on sides
• Operating ambient temperature range: [5°C ; 40°C]
• Storage temperature range: [-20°C ; 90°C]
• Ingress protection: IP20

4x SE Audiotechnik CV 212 Long Range Top

• 2-way system
• Frequency response (-3 db): 100 - 15,000 Hz
• Frequency response (-10 dB): 50 Hz – 16,000 Hz
• Dispersion (horizontal x vertical): 90° x 60°
• Nominal impedance: 4 Ω
• Sensitivity: 100 dB
• Peak power: 3200 W
• Continuous power: 800 W
• Maximum SPL: 140 dB
• Crossover frequency: 1.15 kHz
• Neutrik speakON NL4 connectors
• Clamping system with 14 x M10
• Cabinet material: 15 mm plywood
• Dimensions: 1017 x 380 x 388 mm
• Weight: 35 kg

6x Subwoofer SE Audiotechnik CV-118B

• Passive subwoofer
• Speaker configuration: 1 x 18" (4" coil)
• Case type: bandpass cabinet
• Materials: 18mm plywood cabinet with powder coated perforated steel grid
• Features two ergonomically placed handles on the side, non-slip feet and M20 stand mounting flange
• Frequency range (±3 dB): 40 Hz – 130 Hz
• Frequency range (-10 dB): 31 Hz – 140 Hz
• Dispersion angle (-6 dB) [H x V]: omnidirectional
• Nominal impedance: 8 Ω
• Sensitivity: 101 dB
• Peak power: 3400 W
• Continuous power: 850 W
• Max SPL: 142 dB
• Connectors:
  • Input: Neutrik speakON® NL4
  • Output: Neutrik speakON® NL4
• Dimensions: 558 x 762 x 682 mm
• Weight: 62 kg

2x Se Audiotechnik CV-15i passive speakers

• 2-way passive speaker
• Frequency response (±3 dB)*: 55 Hz – 16 kHz
• Frequency response (-10 dB)*: 39 Hz – 19 kHz
• Dispersion (Horizontal x Vertical) (-6 dB) [H x V]: 90° × 60°
• Impedance: 8 Ω
• Sensitivity: 94 dB
• Peak power: 1800 W
• Continuous power: 900 W
• Maximum SPL: 133 dB
• Crossover frequency: 1.85 kHz
• Connectors: Input signal: Neutrik speakON® NL4
• Link output: Neutrik speakON® NL4
• Wiring: Pins+1/-1 input / THRU
• Pins+2/-2 N.C.
• MECHANICAL
• Dimensions: 716 x 446 x 446 mm
• Weight: 28.5 kg
• Enclosure made of 15 mm plywood