Nexo 03DTDAMP4X1.3C Amplifier 4X1300W

Nexo 03DTDAMP4X1.3C 4X1300W Power amplifier 

Characteristics:

• Perfect match for NEXO speakers supported by DTD controller
• High efficiency Switch Mode power supply and Amplifier channel design
• Channels can be connected independently two by two
• Extensive protection (mains over/under voltage, temperature, DC outputs, current and voltage peak limiters, variable speed cooling system)

Power:

• Channels: 4 x amplifier channels, 2 by 2 bridgeable
• Output voltage (no load): max. 4 x 135V
• Output power (4 x 8 ohms): max. 4 x 750W
• Output power (4 x 4 ohms): max. 4 x 1300W
• Output power (2 bridge x 8 ohms): max. 4 x 2600W

Audio Features:

• Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz
• Input impedance: 10 kOhm
• Input sensitivity: +8 dBU
• Nominal gain: 32 dB
• Dynamic range (A-weighted): > 110 dB
• THD+N: typical 0.01%

Back panel features:

• Analog audio inputs: 4 x balanced analog inputs on XLR
• Power outputs: 4 x SP4
• Link switch: to use the same XLR input for 2 adjacent channels
• Main sockets: IEC C14 socket with lock

Front panel features:

• Controls: On/Off switch and volume / channel button
• Indicators: 4 x LEDs (signal / -18 dB / -6 dB / peak) / channel
• Amplifier Status: Amp Ready and Temperature Indicator / Channel Pair

Mains Requirements:

• Preconfigured for 230 V
• Power consumption (reactive): 65 W
• Power consumption 1/8 / 4 ohms: max. 900 W
• Power consumption 1/4 / 4 ohms: max. 1800 W

• Dimensions: 480 x 44 x 370 mm, 19" / 1U
• Weight: 7.5 kg
• Operation at temperatures between: 0°C - 45°C

Note: For price, please contact us!