Nexo 03NANONXAMP4 digital controller is a combined 4-channel nanoNXAMP4 amplification and processing solution that significantly reduces the cost of NEXO sound systems for retail, hospitality, places of worship and corporate installations, without compromising sound. Compact yet feature-packed, with ultra-low distortion and highly reliable Class-D amplification, it delivers 4 x 250W, delivering the same acclaimed sound quality and sonic signature as NEXO's larger NXAMPMK2 TD controllers. The processing features FIR filtering for accurate system EQ and linear phase compatibility, with presets tailored for a select range of loudspeakers from NEXO's renowned ID and ePS series. On-board mixer and matrix functions further reduce the total cost of smaller installations, with remote setup and control enabled by a built-in web page that can be accessed via Ethernet or built-in Wi-Fi.
Note: For price please contact us!
Nexo 03NANONXAMP4 digital controller
- Digital controller/amplifier
- 4x amplification channels, 2 by 2 bridgeable
- Output voltage (no load) max.: 4x 70 V
- Output power (4-channel mode / 8 Ω load per channel) max.: 4x 200 W
- Output power (4-channel mode / 4 Ω load per channel) max.: 4x 250 W
- Output power (2-channel mode / 8 Ω load per channel) max.: 2x 500 W
- Power consumption (idle): 20 W
- Power consumption (standby): <2 W
- Power consumption (standby without network): <0.5 W
- Frequency response: +0/-0.25 dB from 20 Hz to 20 kHz
- Input Impedance / Input Sensitivity: 20 K Ω / +13 dBU
- Dynamic Range / TDH + N: >106 dB A-weighted / < 0.05% on a flat configuration
- Latency: 1ms on a flat setup
- Audio AD and DA converters: 24-bit @ 48 kHz
- 64-bit DSP processing
- Analog audio inputs: 4x balanced analog inputs on Euroblock 3.5 mm pitch or unbalanced on RCA
- Power outputs: 4x Euroblock outputs 5 mm pitch
- Digital audio input/output: 1x SPDIF 2ch input/output on RCA
- GPIO port: 1 x Euroblock 3.5 mm pitch with 4 inputs and 1 output
- Network inputs: 1x 100 Mb Ethernet port (remote control)
- 1x IEC C14 socket
- 5x LEDs on the front panel (WiFi / Network / Output / Input / Status)
- Control via 100 Mb Ethernet Port or via integrated WiFi (Access Point or Client)
- Universal power supply with active PFC: 100 - 240 V (50/60 Hz)
- Power consumption 1/8 max. 4Ω: 250W
- Dimensions: 44.5 x 220 x 296 mm (1.75 x 8.66 x 11.6”)
- Weight: 2.8 kg (6.2 lbs)
Note: For price please contact us!