Electropower EP-SAR-2000VA-(1200W)-230V

Electropower EP-SAR-2000VA- (1200W) -230V voltage stabilizer

Power - expressed in W (Watt - real power) or VA (Volt / Amper - apparent power), the power of the stabilizer must not be less than the total power consumption of the consumers you want to connect to the stabilizer, it is even advisable to be as large as possible. If the power of the stabilizer is expressed in VA (Volt / Amper - apparent power), it must be taken into account that the actual power (expressed in W-Watt) represents approximately 80% of it. Electropower voltage stabilizers with servomotor have a real power (Watt) of 80% of the apparent power, and the model with relay 70%.

Technical specifications:

    Phase number Single phase and switch on the front panel
    Power (W) 1200
    Relay Technology
    Input voltage 145V-255VAC
    Stabilized 220V-230V output voltage
    Power factor 0.8
    Output voltage accuracy 230V ± 2.5%
    50Hz / 60Hz frequency
    Response time ≤1.5s
    Stabilization accuracy ± 8%
    Ambient temperature -10 +40 Celsius
    97% efficiency
    Maximum allowable overload 150% for 2 minutes
    Relative humidity 90% without condensation
    Protections Overvoltage, undervoltage, overload, short circuit, overheating
    Degree of Protection IP20
    Weight 5 kg
    Dimensions 23 × 15.6 × 19.5 cm