Voltage stabilizer Electropower EP-SVC-3000VA-(2400W)-230V Second-hand with servo motor and LED display, indicated to be used for consumers whose actual power does not exceed 3200W (3.2kW).
Attention, if the voltage fluctuations go below 180V, the voltage stabilizer has half the power, in which case the stabilizer must be larger as the power
Note:
- The product is second-hand
- Excellent working and aesthetic condition
- Warranty 12 months
- The images are for information purposes only, there may be slight differences between the image shown online and the actual product
Voltage stabilizer Electropower EP-SVC-3000VA-(2400W)-230V Second-hand
- Voltage stabilizer
- Number of phases: Single phase
- Power (W): 2400
- Servo Motor Technology
- Input voltage: 140V-260V
- Output voltage: 230V
- Power factor: 0.8
- Output voltage accuracy 230V: ±2.5%
- Frequency: 50Hz/60Hz
- Response time: ≤1.5s
- Stabilization accuracy: ±2.5%
- Ambient temperature: -10 +40 Celsius
- Efficiency: >95%
- Maximum permissible overload 150% for 2 minutes
- Relative humidity: <95%
- Protections: overvoltage, undervoltage, overload, short circuit, overheating
- Degree of protection: IP20
- Weight: about 11 kg
- Dimensions: 33.5 × 21.7 × 24 cm
Power - expressed in W (Watt - real power) or VA (Volt/Ampere - apparent power), the power of the stabilizer must not be lower than the total consumption power of the consumers you want to connect to the stabilizer, being even indicated to be as big as possible. If the power of the stabilizer is expressed in VA (Volt/Ampere - apparent power), it must be taken into account that the real power (expressed in W-Watt) represents approximately 80% of it. Electropower servo motor voltage stabilizers have a real power (Watt) of 80% of the apparent power, and the relay model 70%
Note:
- The product is second-hand
- Excellent working and aesthetic condition
- Warranty 12 months
- The images are for information purposes only, there may be slight differences between the image shown online and the actual product